When it comes to the key solar terms of spring plowing, summer planting, and autumn harvest, the tractor is the most capable model worker on our farm. However, if it is not properly maintained, the tractor may often stop, and you are still confused and don’t know where to start troubleshooting. In fact, many times it is not a big problem, but several key parts should have been replaced long ago. If you don’t want to stamp your feet in a hurry, then you must read this farm tractor parts checklist before the busy season!
1. Start System
The most likely problem for agricultural machinery after a long period of storage is the starting system. How should the problem of the starting system be checked? First, check whether the battery is low and leaking, especially for equipment that has been stored for a whole winter. It is recommended to charge or replace a new battery in advance. Then don’t forget to start the motor. Slow start and abnormal noise may indicate that the starter is aging. Check whether the circuit connector is loose or has signs of corrosion.
2. Filter Kit
If the air filter is blocked, the engine will be “out of breath”; if the diesel filter is dirty, the oil circuit will easily have a problem of poor oil supply; if the oil filter is not replaced, it is useless to put in new oil. Therefore, before spring ploughing, it is recommended to check all three filters and replace them directly if conditions permit, so as to avoid trouble during the busy farming season. In addition, using farm tractor parts from regular channels, such as original parts or high-quality replacement parts, can save a lot of trouble in the later stage.
3. Hydraulic System
Many agricultural implements need to rely on the hydraulic system of the tractor to operate, so don’t ignore the inspection of hydraulic oil. If the fluid level is too low, the color becomes darker, or there is foam, it means that the oil should be changed. In addition, it is also worth checking carefully whether there are signs of oil leakage in the hydraulic pipelines and joints, and whether there are scratches on the cylinder body. Once there is a problem with the hydraulic system, it may directly affect the operational efficiency and even cause the operation to be interrupted.
4. Tire & Transmission System
Whether the tire pressure is sufficient and whether the tire is aging or bulging is directly related to the stability of field operations. As for the transmission system, the drive shaft, transmission oil, and clutch plate also need to be checked in advance. Especially for tractors that often work in mountains or hard soil, these parts are more prone to wear. If you find that shifting gears is difficult and the abnormal noise is serious, it may be that there is a problem with the clutch or gear set.
5. Cooling System
As the temperature rises in spring and summer, the importance of the cooling system also increases. Whether the water tank is blocked, whether the fan belt is loose, and whether the antifreeze is sufficient and not deteriorated, all need to be carefully checked. Once the cooling is not good, the engine overheats, which may cause shutdown or even scrapping. Especially for old equipment, pay more attention to the working status of the water pump and temperature control switch.
Different Equipment AGE, Different Inspection Focus
If your tractor is relatively new (1-3 years of service life), you only need to replace the wearing parts, such as the filter element, engine oil and battery; but for middle-aged tractors (4-7 years of use), in addition to these, you also need to pay attention to the aging of structural components such as the hydraulic system, tires, and cooling system. For older equipment (over 7 years old), it is recommended to predict in advance whether the engine and gearbox are likely to be overhauled, and consider gradually replacing key farm yractor parts to extend the service life.
Conclusion
Adjusting the equipment to the best state before the busy farming season is the most direct guarantee for production. When purchasing accessories, be sure to identify regular channels. For example, FridayParts has various models of farm tractor parts, which are not only compatible and of stable quality, but also can be delivered to your door quickly, without delaying your golden working time.